Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/3265
Title: Physical mechanisms for hot-electron degradation in GaN light-emitting diodes
Authors: Leung, K. K.
Fong, Wai-keung Patrick
Chan, Paddy K. L.
Surya, Charles
Subjects: Gallium compounds
Hot carriers
III-V semiconductors
Indium compounds
Light emitting diodes
Semiconductor device noise
Semiconductor device reliability
Semiconductor quantum wells
Wide band gap semiconductors
Issue Date: 1-Apr-2010
Publisher: American Institute of Physics
Source: Journal of applied physics, 1 Apr. 2010, v. 107, no. 7, 073103, p. 1-6.
Abstract: We report investigations on the degradation of GaN-based light-emitting diodes due to high dc current stress by examining two types of devices with the same fabrication procedures except for the growth conditions for the InGaN quantum wells (QWs). Higher trimethylindium and triethylgallium fluxes are used for type A devices resulting in a threefold increase in the InGaN QWs growth rate compared to type B devices. Detailed structural and optoelectronic properties of the devices are investigated by transmission electron microscopy, atomic force microscopy, thermal imaging, I-V measurements, and the low-frequency noise properties of the devices as a function of the stress time, t[sub S]. The experimental data show that the QWs in type B devices are dominated by spiral growth and they have substantially higher strain nonuniformity than type A devices. The highly strained GaN/InGaN interfaces in device B are also responsible for the faster increase in the defect density due to hot-electron injection. The defects enhance the trap-assisted tunneling in the multiple quantum wells (MQWs) resulting in the development of hot spots among type B devices after high current stressing of the MQWs. This in turn leads to an increase in the defect generation rate resulting in a thermal run-away condition that ultimately resulted in the failure of the device. The data show that an increase in the growth rate in the InGaN layer led to the domination by the step flow growth mode over the spiral growth mode in the MQWs. This is the main reason for the reduction in the dislocation density in type A devices and hence their increase in device reliability.
Rights: © 2010 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in K.K. Leung et al., J. Appl. Phys. 107, 073103 (2010) and may be found at http://jap.aip.org/resource/1/japiau/v107/i7/p073103_s1.
Type: Journal/Magazine Article
URI: http://hdl.handle.net/10397/3265
DOI: 10.1063/1.3357312
ISSN: 0021-8979 (print)
1089-7550 (online)
Appears in Collections:EIE Journal/Magazine Articles
ME Journal/Magazine Articles

Files in This Item:
File Description SizeFormat 
JApplPhys_107_073103.pdf686.42 kBAdobe PDFView/Open


All items in the PolyU Institutional Repository are protected by copyright, with all rights reserved, unless otherwise indicated. No item in the PolyU IR may be reproduced for commercial or resale purposes.